> Home > Freetronics > 433MHz Receiver Shield

Freetronics 433MHz Receiver Shield


Photo: Jonathan Oxer

Shield URL: 433MHz Receiver Shield
Tags: prototyping, receiver
Maker: Freetronics

This shield contains a wireless receiver module that operates at 433MHz, a frequency commonly used by consumer electronics including weather stations, home automation remote controls, power consumption meters, car alarms, and also many DIY projects.

The design is based on the "Weather Station Receiver" project in the book "Practical Arduino".

Open Source: Yes, OSHW-compliant
License: TAPR Open Hardware License
Source: github.com/freetronics/Rx433Shield/tr...

AREF
GND
D13 / SCK
D12 / MISO
RESET D11 / MOSI ~
3.3V D10 / SS ~
5V D9 ~
GND D8
GND
VIN D7
D6 ~
A0D5 ~
A1D4
A2D3 ~
A3D2
A4D1 / TX
A5D0 / RX
Note:
Only D8 is actually required for the radio receiver. D6 and D7 are connected to active-low status LEDs and could be used for other purposes if required.

Did I make a mistake? Tell me!